◼ Power Supply Voltage
- Single 2.3V-3.6V supply
◼ 64M bit Serial Flash
- 64 M-bit/8M-Byte/32,768 pages
- 256 Bytes per programmable page
- Uniform 4K-Byte Sectors, 32K/64K-Byte
Blocks
◼ New Family of SPI Flash Memories
- Standard SPI: CLK, CS#, DI, DO, WP#,
HOLD#/RESET#
- Dual SPI: CLK, CS#, DI, DO, WP#,
HOLD#/RESET#
- Quad SPI: CLK, CS#, IO0, IO1, IO2, IO3,
RESET#
- QPI: CLK, CS#, IO0, IO1, IO2, IO3,RESET#
- Software & Hardware Reset
- Auto-increment Read capability
◼ Temperature Ranges
- Industrial (-40°C to 85°C)
- Industrial (-40°C to 105°C)
◼ Low power consumption
- 1 μA typical standby current, HFM =0
- 10 μA typical standby current, HFM =1
- 1 μA typical power down current
◼ Efficient “Continuous Read” and QPI
Mode
- Continuous Read with 8/16/32/64-Byte Wrap
- As few as 8 clocks to address memory
- Quad Peripheral Interface(QPI) reduces
instruction overhead
◼ Flexible Architecture with 4KB sectors
- Sector Erase (4K-Byte)
- Block Erase (32K/64K-Byte)
- Page Program up to 256 Bytes
- More than 100K erase/program cycles
- More than 20-year data retention
◼ Advanced Security Feature
- Software and Hardware Write-Protect
- Power Supply Lock-Down and OTP
protection
- Top/Bottom, Complement array protection
- Individual Block/Sector array protection
- 128-Bit Unique ID for each device
- Serial Flash Discoverable Parameters
(SFDP) Register
- 3X1024-Byte Security Registers with OTP
locks
- Volatile & Non-volatile Status Register Bits
◼ High performance program/erase speed
- Page program time: 500us typical
- Sector erase time: 45 ms typical
- Block erase time: 250ms typical
- Chip erase time: 30s typical
◼ Package Options
- SOP8 - 208mil
- SOP8 – 150mil
- SOP16 - 300mil
- DFN8 (4*3*0.55mm)/(5*6*0.75mm)
- TFBGA24
- All Pb-free packages are RoHS compliant